Features:
|
3rd Generation Design - All New again.
The first & second generation bars were ground breaking in their design, but with some track testing and further enhancements we have developed this new design based on your feedback. We sold thousands of the original design, but with racer and street driver input this new product is the result of all your feedback.
|
| |
8
Bolt Mounting System. New stronger design has extra
mounting tab and stronger end plates vs. other designs.
This will keep the bar mounted on even the highest HP cars or
full out race cars. The bar also has a nice black plastic
cap closing up the hole in the end of the bar to keep debris
out.
|
| |
Mounting System, 2 bolts not 1.
- Our new mounting system consists of a bolt for the radius arm to the control arm plus a plate bolt and spacer into the second hold increasing the strength of the radius arm to the control arm. We don't single mount them to the control arm as one bolt holding it on could break and cause you to lose control of your car.
The double bolting system as you see to the right here shares the load from the car across two bolts making it much much stronger and almost impossible to fail at this point even under heavy loads.
|
 |
| |
Full Mounting Hardware package included
(1) 2x Swaged 7071-T7 Aluminum Radius arms
(2) 2x Rod End bolts and nuts (gold)
(3) 2x Control Arm Jumper Brackets
(4) 4x Locking washers
(5) 4x Aluminum Cone Spacers
(6) 4x Chromoly Rod ends and jam nuts
(7) 4x washer like spacers
(8) 2x short LCA mounting bolts
(9) 2x long LCA mounting bolts
(10) 2x LCA aluminum long spacers
(11) 2x Side brackets (silver)
(12) 2x 1/2" bolts with lock nuts
(13) 2x chassis bolts with large washers |
 |
| |
Aluminum Radius Arms & Stronger Rod Ends.
We
searched the market for the best radius arms but couldn't find anything that is
strong enough. We had these custom made to our specifications which are
the strongest in the industry. These are now swaged polished 7071-T7 aluminum radius arms
that are .150 thick with an 1.125" OD. 7071-T7 is one of the highest
grades available and is generally used only in major arospace use.
We use chromoly & Teflon lined
rod ends are 5/8ths thick and are heat treated black. The strongest available
for this application based on our exhaustive testing.
|
 |
| |
General Mounting and setup Pics |
| |
Here is the order that the bolts and hardware
go together on the control arm. You can see that the
shorter bolt goes through the rod end, this is so you don't have
to remove your sway bar to get it in. The rear bolt is
longer because it has the room and has nothing in the way. |
 |
| |
Here is a pic of everything assembled
on the control arm. |
 |
| |
How the control arm mounts up to the traction
bar with the aluminum spacers. |
 |
| |
WITH OUR LATEST MODEL,
YOU WILL GET 8" OF CLEARANCE!
Headers or down pipes will hit
your radiator before they hit our traction bar with the new
design. |
 |
US Dollars
