ETD Racing.com -  TEL: 905-953-9260  -  Open M-F 9-6  -  Hardcore Parts for Hardcore Enthusiasts
 

 
K-Tuned K-Series Swap Traction Bar for 90-93 Integra
- Gen 3 bars, completely new design is even stronger to eliminate failures.
- Custom made aluminum radius arms are now even stronger.
- Bar is welded with a combination of Tig and Mig for the best overall strength.
- All mounting hardware included.
- All hardware is plated to prevent rust.
- New ultra tough powder coating is the strongest and thickest ever.
- New high quality packaging, so the product gets to you in tip top condition.
- 100% bolt-on installation.
- Perfect upgrade for all cars (race to street)
- Does not interfere with factory radiator mounting tabs.
 

- Custom designed bar for any K-series engine swap.
- Rad brackets are included to make rad relocation very easy.
- Bolt-on side brackets for additional support.
- New double rod ends, one on each end of the radius arm.

Our ETD Racing traction bars have been improved and revised numerous times. The result is a traction bar that we feel is the very best in the industry. We use high grade steel and chromoly in the construction and some of the strongest hardware available. These bars are designed for race cars, track cars, high horsepower street cars and even swapped/stock street cars. They are engineered from extensive track testing and racing, to improve both traction and handling. They are designed with complete bolt-on installation in mind and bolt directly to the factory tow hook mounting locations. Bottom line is, we don’t just sell these bars, we use them on our race cars.

The main bar is fairly light weight and the end plates are CNC machined and laser cut from ¼ “ steel. They are welded by hand and then finished with a thick layer of durable powder coating. Our rod ends are very high quality parts and are extremely strong. The radius arms are made using thick-walled aluminum, which prevents fatigue and breakage. The radius arms can be adjusted with a simple twist so fitment is always perfect and very easy.
 

Part Number: 90-93-TBK-106
 
Acceptance Mark US Dollars
90-93 Traction Bar

90-93-TBK-106
 		 MSRP: $349
Our Price: $330
Shipping: $20
In Stock: In Stock
 
 
 
Features:




 		 4rd Generation Design - All New again.

The first & second and recently thrid generation bars were ground breaking in their design, but with some track testing and further enhancements we have developed this new design based on your feedback.  We sold thousands of the original design, but with racer and street driver input this new product is the result of all your feedback...
 
  Bar is no longer butt welded to the plate.  The mounting plate is drilled and the bar goes through it and welded on the outside.  This added a lot of extra strength and completely eliminated welds breaking.  ETD Racing traction bars are the only bars built like this.

New Shinier and stronger Powder Coating
We no longer use the dull black powder coating we have switched to this deep shiny black powder coating which is thicker and more durable than any coating we have ever used before.






 
  New extra mounting point.  

For extra stability we made an angle bracket that bolts to the end plate and to the under side of the front frame rail.  This new silver zinc coated plate will provide a lot of additional lateral support for the bar.  It bolts to the end plate and uses your stock chassis bolt into the frame rail. 

The reason we made it separate like this is we have found that over the years many cars have shifted enough that bolt holes didn't line up, even by very small amounts when they were welded.  Now with it being bolted at both ends it gives just enough extra movement so that it will line up on every car.


 
  Mounting System, 2 bolts not 1.

- Our new mounting system consists of a bolt for the radius arm to the control arm plus a plate bolt and spacer into the second hold increasing the strength of the radius arm to the control arm.  We don't single mount them to the control arm as one bolt holding it on could break and cause you to lose control of your car.

The double bolting system as you see to the right here shares the load from the car across two bolts making it much much stronger and almost impossible to fail at this point even under heavy loads.



 
  Full Mounting Hardware package included

(1) 2x Swaged 7075-T7 Aluminum Radius arms
(2) 4x 5/8" Chromoly Rod ends and jam nuts
(3) 2x Control Arm Jumper Bracket
(4) 4x Grade 12.9 Chassis Bolts with Washers
(5) 2x Rod End bolts with locking nuts
(6) 2x Control Arm spacers
(7) 4x Control arm nuts with locking washers

 
  Hardware continued...

(1) 2x Chassis mounting brackets
(2) 2x Bolts and washers
(3) Rad Supports











 
  Aluminum Radius Arms & Stronger Rod Ends.

We searched the market for the best radius arms but couldn't find anything that is strong enough.  We had these custom made to our specifications which are the strongest in the industry.  These are now swaged polished 7071-T7 aluminum radius arms that are .150 thick with an 1.125" OD.  7071-T7 is one of the highest grades available and is generally used only in major aerospace use.

We use chromoly & Teflon lined rod ends are 5/8ths thick and are heat treated black. The strongest available for this application based on our exhaustive testing.
 


 
  Rad brackets are included

For your convenience we include the rad brackets so you can mount your rad anywhere.


 
 
 
ETD Racing.com -  TEL: 905-953-9260  -  Open M-F 9-6  -  Hardcore Parts for Hardcore Enthusiasts